F5 Big IP 2000s Appliance Configuration Step by Step Guide - 1. Initial Configuration - 91Sec

Latest

Learning, Sharing, Creating

Wednesday, September 28, 2016

F5 Big IP 2000s Appliance Configuration Step by Step Guide - 1. Initial Configuration

Two BIG-IP 2200s boxes arrived into the office today for new web service project with multiple rack kits are inside. Two additional power supplies come in with another two small boxes.

The rack rail mounting kit make rack installation much easier , just like mounting a server.

The entry-level BIG-IP 2000 series provides a high-performance ADC platform for organizations wanting to add integrated application delivery to their networks, with options for advanced security.

BIG-IP 2200s


I have a couple of related posts in this blog:

LTM essentials  Slides:




Both devices have been mounted into rack side by side.


 
There are three cables connecting to each devices. Blue one is Mgmt interface; Yellow one is on Console port. Purple cable is on Port 1.1. Sync cable is not connecting yet. 
 

Initial Configuration:


1. Log into Appliance from Console

Kernel 2.6.32-279.19.1.el6.f5.x86_64 on an x86_64
localhost.localdomain login: root
Password: default
[root@localhost:NO LICENSE:Standalone] config # 


2. Check BigIP Hardware Model and Platform

[root@localhost:NO LICENSE:Standalone] config # tmsh
root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/Common)(tmos)# show /sys hardware

Sys::Hardware
Chassis Fan Status
  Index  Status  Low Limit(rpm)  Fan Speed(rpm)
  1      up      1000            12200
  2      up      1000            12000
  3      up      1000            11806
  4      up      1000            12000

Chassis Information
  Maximum MAC Count  2
  Registration Key   -

Chassis Power Supply Status
  Index  Status  Current
  1      up      AC
  2      up      AC

Chassis Temperature Status
  Index  Lo Limit(C)  Temp(degC)  Hi Limit(C)  Location
  1      0            26          43           Main board inlet IC temperature
  2      0            26          59           Main board outlet IC temperatur
  3      0            30          65           Power supply #1 meas. inlet tem
  4      0            33          65           Power supply #2 meas. inlet tem
  5      0            35          59           Main board near power supplies 

CPU Status
  Index  Temp(degC)  Fan Speed(rpm)
  1      36          12000

Hardware Version Information
  Name        cpld
  Type        pic
  Model       F5 CPLD
  Parameters  --                   --
              version              0xa
 
  Name        cpus
  Type        base-board
  Model       Intel(R) Core(TM) i3- CPU @ 2.00GHz
  Parameters  --                   --
              cache size           3072 KB
              cores                4  (cores/cpu:2)
              cpu MHz              2000.000
 
  Name        lop
  Type        pic
  Model       F5
  Parameters  --                   --
              Boot loader version  1.04
              Firmware version     4.08
 
  Name        mainboard
  Type        base-board
  Model       F5
  Parameters  --                   --
              Assembly serial      pca0280za138
              Board type           N/A
              Level 400 part       PCA-0280-09 REV B
              PCN level            PCA-0280-09 REV B
              Revision             N/A
 
  Name        psu1
  Type        psu
  Model       SPAFFIV-03G
  Parameters  --                   --
              Location             1
              Manufacturer         BEL POWER
              Revision             07
              Serial number        C0481
 
  Name        psu2
  Type        psu
  Model       SPAFFIV-03G
  Parameters  --                   --
              Location             2
              Manufacturer         BEL POWER
              Revision             07
              Serial number        C0456
 
  Name        qa0
  Type        coproc
  Model       Cave Creek SKU3 C1 Crypto/Compression Coprocessor
  Parameters  --                   --
              version              QA API: 1.1.0-62, FW: 1.1.1
 

Platform
  Name           BIG-IP 2200
  BIOS Revision  OBJ-0433-xx Build: 2.04.010.0 07/21/2015
  Base MAC       f4:11:63:0c:a6:00

System Information
  Type                       C112
  Chassis Serial             f5-qicp-lflf
  Level 200/400 Part         200-0356-06 REV N
  Switchboard Serial          
  Switchboard Part Revision   
  Host Board Serial          pca0280za128
  Host Board Part Revision    

root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/Common)(tmos)# 



3. Configuring a management IP address


  • using the LCD panel

You can use the LCD panel to configure the management IP address. The management IP address enables you to access the BIG-IP® Configuration utility to configure other aspects of the product, such as the product license, VLANs, and trunks. The options are located in the System menu.
Note: When using the LCD panel to configure the unit, be sure to use the Commit option to save all settings.


1. Press the X button to activate Menu mode for the LCD.
2. Press the Check button to select System.
3. To configure the management IP address using DHCP:
a) Press the Check button to select DHCP.
b) Press the Check button to select enabled.
4. To configure the management IP address manually:
a) Press the Check button to select Management.
b) Press the Check button to select Address Type, and then press the Check button again to select
either IPv4 or IPv6.
c) Use the arrow keys to select Mgmt IP and press the Check button.
d) Use the arrow keys to configure the management IP address.
e) Use the arrow keys to select Prefix Length and press the Check button.
f) Use the arrow keys to configure the length of the routing prefix for the IPv4 or IPv6 management
IP address.
g) Use the arrow keys to select Mgmt Gateway and press the Check button.
h) Use the arrow keys to configure the default route for the management interface.
5. Use the arrow keys to select Commit and press the Check button.


  • Using TMSH Command

By default, Mgmt interface has been configured ip as 192.1681.245/24. We will change it to 10.94.200.31/24 from command line.

[root@localhost:NO LICENSE:Standalone] config # ifconfig
eth0      Link encap:Ethernet  HWaddr F4:15:63:07:6C:01  
          inet6 addr: fe80::f615:63ff:fe07:6c01/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3459551 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1807450 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:252627843 (240.9 MiB)  TX bytes:132901778 (126.7 MiB)
          Interrupt:18 

http-tunnel Link encap:Ethernet  HWaddr F4:15:63:07:6C:02  
          inet6 addr: fe80::f615:63ff:fe07:6c02/64 Scope:Link
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.255.255.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3275888 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3275888 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:268792151 (256.3 MiB)  TX bytes:268792151 (256.3 MiB)

mgmt      Link encap:Ethernet  HWaddr F4:15:63:07:6C:01  
          inet addr:192.168.1.245  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::f615:63ff:fe07:6c01/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3456315 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1806173 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:187445901 (178.7 MiB)  TX bytes:125352904 (119.5 MiB)

mgmt.1    Link encap:Ethernet  HWaddr F4:15:63:07:6C:01  
          inet addr:127.2.0.2  Bcast:127.2.0.255  Mask:255.255.255.0
          inet6 addr: fe80::f615:63ff:fe07:6c01/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3405261 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1806165 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:184354435 (175.8 MiB)  TX bytes:125352472 (119.5 MiB)

mgmt_bp   Link encap:IPIP Tunnel  HWaddr   
          inet addr:127.3.0.0  Mask:255.255.255.255
          UP RUNNING NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:8 dropped:0 overruns:0 carrier:8
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf1-1     Link encap:Ethernet  HWaddr F4:15:63:07:6C:02  
          inet6 addr: fe80::f615:63ff:fe07:6c02/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf1-2     Link encap:Ethernet  HWaddr F4:15:63:07:6C:03  
          UP BROADCAST PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf1-3     Link encap:Ethernet  HWaddr F4:15:63:07:6C:04  
          UP BROADCAST PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf1-4     Link encap:Ethernet  HWaddr F4:15:63:07:6C:05  
          UP BROADCAST PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf1-5     Link encap:Ethernet  HWaddr F4:15:63:07:6C:06  
          UP BROADCAST PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf1-6     Link encap:Ethernet  HWaddr F4:15:63:07:6C:07  
          UP BROADCAST PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf1-7     Link encap:Ethernet  HWaddr F4:15:63:07:6C:08  
          UP BROADCAST PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf1-8     Link encap:Ethernet  HWaddr F4:15:63:07:6C:09  
          UP BROADCAST PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf2-1     Link encap:Ethernet  HWaddr F4:15:63:07:6C:0A  
          UP BROADCAST PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

pf2-2     Link encap:Ethernet  HWaddr F4:15:63:07:6C:0B  
          inet6 addr: fe80::f615:63ff:fe07:6c0b/64 Scope:Link
          UP BROADCAST PROMISC MULTICAST  MTU:9198  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

socks-tunnel Link encap:Ethernet  HWaddr F4:15:63:07:6C:02  
          inet6 addr: fe80::f615:63ff:fe07:6c02/64 Scope:Link
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

tmm0      Link encap:Ethernet  HWaddr 00:98:76:54:32:10  
          inet addr:127.1.1.1  Bcast:127.1.1.255  Mask:255.255.255.0
          inet6 addr: fe80::298:76ff:fe54:3210/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:9282  Metric:1
          RX packets:177684 errors:0 dropped:0 overruns:0 frame:0
          TX packets:179458 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:10929132 (10.4 MiB)  TX bytes:14980686 (14.2 MiB)




[root@localhost:NO LICENSE:Standalone] config # tmsh
root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/Common)(tmos)# list /sys management-ip
sys management-ip 192.168.1.245/24 { }
root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/Common)(tmos)# list /sys management-route
root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/Common)(tmos)# create /sys management-ip 10.94.200.34/255.255.255.128
root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/Common)(tmos)# list /sys management-ip
sys management-ip 10.94.200.31/25 { }
root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/Common)(tmos)# create /sys management-route default gateway 10.94.200.26
root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/Common)(tmos)# save /sys config partitions all
Saving running configuration...
  /config/bigip.conf
  /config/bigip_base.conf
  /config/bigip_user.conf
root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/Common)(tmos)# 


You can verify it through accessing https://10.94.200.34. Default username and password is admin / admin.



  • Using Web GUI

Since default pre-configured ip is 192.168.1.245/24, you can change your machine to the same network 192.168.1.0/24 and access it through Web GUI. After log in , you can change it to the one you like:


You will have to change host name, root password, admin password as well before you can submit the change.





Other steps can be found from my previous post F5 Big-IP 2500 Appliance System Initial Configuration.

 
Appendix 1:

Specifications2000s2200s
Intelligent Traffic
Processing:
L7 requests per second: 212K
L4 connections per second: 75K
L4 HTTP requests per second: 550K
Maximum L4 concurrent connections: 5M
Throughput: 5 Gbps L4/L7
L7 requests per second: 425K
L4 connections per second: 150K
L4 HTTP requests per second: 1.1M
Maximum L4 concurrent connections: 5M
Throughput: 5 Gbps L4/L7
Hardware SSL:Included: 2,000 TPS (2K keys)
Maximum: 2,000 TPS (2K keys)
4 Gbps bulk encryption*
Included: 4,000 TPS (2K keys)
Maximum: 4,000 TPS (2K keys)
4 Gbps bulk encryption*
FIPS SSL:N/AN/A
Hardware DDoS Protection:N/AN/A
Hardware Compression:N/AIncluded: 4 Gbps
Maximum: 4 Gbps
Software Compression:Included: 2.5 Gbps
Maximum: 2.5 Gbps
N/A
Software Architecture:64-bit TMOS64-bit TMOS
On-Demand Upgradable:YesN/A
Processor:Intel dual core (total 4 hyperthreaded logical
processing cores)
Intel dual core (total 4 hyperthreaded logical processing cores)
Memory:8 GB8 GB
Hard Drive:500 GB500 GB
Gigabit Ethernet CU Ports:88
Gigabit Fiber Ports (SFP):Optional SFP (SX, LX, or copper)Optional SFP (SX, LX, or copper)
10 Gigabit Fiber Ports (SFP+):2 SR or LR (sold separately);
Optional 10G copper direct attach
2 SR or LR (sold separately);
Optional 10G copper direct attach
40 Gigabit Fiber Ports (QSFP+):N/AN/A
Power Supply:One 400W included (80+ Platinum efficiency),
dual power and DC options
One 400W included (80+ Platinum efficiency),
dual power and DC options
Typical Consumption:74W (single supply, 110V input)**74W (single supply, 110V input)**
Input Voltage:90–240 VAC +/- 10% auto switching, 50/60hz90–240 VAC +/- 10% auto switching, 50/60hz
Typical Heat Output:252 BTU/hour (single supply, 110V input)**252 BTU/hour (single supply, 110V input)**
Dimensions:1.75” (4.45 cm) H x 17” (43.18 cm) W x 21” (53.34 cm) D
1U industry standard rack-mount chassisn
1.75” (4.45 cm) H x 17” (43.18 cm) W x 21” (53.34 cm) D
1U industry standard rack-mount chassis
Weight:20 lbs. (9.1 kg) (one power supply)20 lbs. (9.1 kg) (one power supply)
Operating Temperature:32° to 104° F (0° to 40° C)32° to 104° F (0° to 40° C)
Operational Relative Humidity:5 to 85% at 40° C5 to 85% at 40° C
Safety Agency Approval:UL 60950-1 2nd Edition
CAN/CSA C22.2 No. 60950-1-07
EN 60950-1:2006, 2nd Edition
IEC 60950-1:2006, 2nd Edition
Evaluated to all CB Countries
UL 60950-1 2nd Edition
CAN/CSA C22.2 No. 60950-1-07
EN 60950-1:2006, 2nd Edition
IEC 60950-1:2006, 2nd Edition
Evaluated to all CB Countries
Certifications/
Susceptibility Standards:
EN 300 386 V1.5.1 (2010-10)
EN 55022:2006 + A1:2007
EN 61000-3-2:2006
EN 61000-3-3:1995 + A1:2000 + A2:2005
EN 55024: 2010
USA FCC Class A
EN 300 386 V1.5.1 (2010-10)
EN 55022:2006 + A1:2007
EN 61000-3-2:2006
EN 61000-3-3:1995 + A1:2000 + A2:2005
EN 55024: 2010
USA FCC Class A


Appendix 2:

Compatible BIG-IP Software Version Matrix for BIG-IP 2000s – 2200s

Platform & BIG-IP Version12.0.011.6.011.5.311.5.211.5.111.5.011.4.111.4.011.3.011.2.1
BIG-IP 2000sXXXXXXXXXX
BIG-IP 2200sXXXXXXXXXX

Reference: 

  1. F5 Networks BIG-IP Datasheets

No comments:

Post a Comment

Banner

BANNER 728X90