Recently received two Check Point 5600 appliance which has R77.30 pre-installed. I have racked them into data center. Both will be used as a cluster to replace existing Check Point UTM devices. It comes with one Sync port, one Mgmt port and eight 10/100/1000base-T ports. Here comes with the picture after console, mgmt and sync ports connected.
 |
| Check Point 5600 Appliance Cluster |
 |
Check Point 5600 Appliance Cluster
|
|
The web GUI is similar as previous version which makes firewall administrators put their hands on quicker and easier.
Technical Specifications:
5600 Security Appliance
- Sync 10/100/1000Base-T RJ45 port
- RJ45/micro USB console port
- One network card expansion slot (HPP)
- 8x 10/100/1000Base-T RJ45 ports
- Management 10/100/1000Base-T RJ45 port
- 2x USB ports for ISO installation
- Lights-Out Management port
| Appliance | 5200 | 5400 | 5600 | 5800 |
|---|
| Security Power | 425 | 600 | 950 | 1750 |
| Firewall Throughput (Gbps) | 5.3 | 10 | 17.5 | 22 |
| IPS throughput (Gbps) | 810 Mbps | 1.08 | 1.9 | 3.05 |
| NGFW throughput (Gbps) | 520 Mbps | 690 Mbps | 1.18 | 2 |
| Threat prevention (Gbps) | 250 Mbps | 330 Mbps | 540 Mbps | 1 |
| Firewall, 1518 byte UDP (Gbps) | 16 | 22 | 25 | 35 |
| Connections per Second (K) | 125 | 150 | 185 | 185 |
| Concurrent Connections (M)2 | 3.2/6.4 | 3.2/6.4 | 3.2/6.4 | 3.2/6.4 |
| VPN AES-128 Throughput (Gbps) | 1.88 | 2.16 | 6.5 | 10 |
| IPS throughput (Gbps) | 3 | 3.9 | 7.8 | 10 |
| NGFW throughput (Gbps) | 2.7 | 3.4 | 5.8 | 8.1 |
| VS Supported (Default/Max)2 | 10/20 | 10/20 | 10/20 | 10/20 |
| 10/100/1000Base-T Ports | 6/14 | 10/18 | 10/18 | 10/26 |
| 1000Base-F SFP Ports | 0/4 | 0/4 | 0/4 | 0/8 |
| 10GBase-F-SFP+ Ports | 0/0 | 0/0 | 0/4 | 0/8 |
| 40GBase-F SFP+ Ports | 0/0 | 0/0 | 0/0 | 0/4 |
| Memory | 8 ,16 | 8, 16 | 8, 16 | 8, 16 |
| Storage | 1x 500 GB | 1x 500 GB | 1x 500 GB | 1x 500 GB |
| I/O Expansion Slots | 1 | 1 | 1 | 2 |
| Lights-Out-Management | Optional | Optional | Optional | Included |
No comments:
Post a Comment